dbcarcare's blog

Upgrading your vehicle’s suspension system is one of the best ways to improve ride quality, handling, and off-road capabilities. If you're looking to tackle rough terrain or simply improve the comfort and stability of your vehicle, Dobinsons Suspension Kits are an excellent choice. Known for their durability and performance, Dobinsons kits are widely used by off-road enthusiasts and commercial drivers alike. If you’re considering installing a Dobinsons Suspension Kits on your own, here’s a step-by-step guide to help you through the process.

Why Choose Dobinsons Suspension Kits?

Dobinsons suspension kits are designed for durability, performance, and ease of installation. Whether you're looking to raise your vehicle for off-roading, improve handling, or increase load capacity, Dobinsons kits provide a comprehensive solution. These kits include everything you need to upgrade your suspension, such as coil springs, shock absorbers, and other essential components. Installation can be done by professionals or DIY enthusiasts, depending on the complexity of the kit and your mechanical skill level.

Tools You’ll Need for Installation:

Before you begin, it’s important to ensure that you have the right tools and equipment for the job. Here’s a list of what you’ll need:

• Car jack and jack stands to lift the vehicle safely.
• Socket and wrench set (including torque wrench).
• Spring compressors (if needed, depending on your suspension setup).
• Pry bars and rubber mallet for disassembling parts.
• Suspension bushings and lubricants (often provided in the kit).
• Safety gloves and eye protection.

Step-by-Step Guide to Installing Dobinsons Suspension KitsStep 1: Prepare Your Vehicle

Before you begin the installation, park your vehicle on a flat, level surface. Engage the parking brake to prevent any accidental movement. If possible, place wheel chocks behind the rear wheels for added safety. You’ll want to lift the vehicle off the ground, so make sure you have the proper equipment to do this safely.

• Lift the Vehicle: Use a car jack to lift the vehicle. Once the vehicle is raised, place jack stands under the frame for extra support. Always ensure the vehicle is securely lifted and supported before you begin working underneath it.

Step 2: Remove the Old Suspension

With the vehicle lifted, you can now begin removing the existing suspension components. This typically involves the following steps:

• Remove the Tires: Take off the wheels to gain access to the suspension components.
• Disconnect the Shock Absorbers: Use your socket and wrench set to remove the bolts connecting the shock absorbers to the vehicle. Depending on your setup, you may need to remove the top and bottom shock mount bolts.
• Uninstall the Springs: If you’re replacing the coil or leaf springs, they will need to be removed. Use a spring compressor if necessary to safely remove the old springs without them springing out. This is especially important for coil springs, as they are under tension.

Step 3: Install the New Dobinsons Suspension Components

Once the old suspension is removed, it’s time to install the new components. Follow the instructions included in the Dobinsons suspension kit to ensure proper fitment. Each kit will come with a set of specific steps, but here’s a general breakdown of what’s involved:

• Install the New Coil Springs: Place the new coil springs in the appropriate locations. If your vehicle has a coil-over shock system, install the new shocks first and then slide the coil springs into position.
• Attach the New Shock Absorbers: Line up the new shock absorbers with the mounts and install them using the bolts provided in your kit. Be sure to tighten the bolts to the specified torque setting to avoid any issues down the road.
• Install the New Bushings (If Applicable): Some suspension kits come with new bushings that need to be installed at various points in the suspension. Make sure to lubricate the bushings if necessary to ensure smooth operation.

Step 4: Reassemble the Suspension

After installing the new components, begin reassembling the suspension system:

• Reattach the Shock Mounts: Tighten the shock mounts securely. Use your torque wrench to ensure you are applying the proper torque to each bolt.
• Reconnect Other Suspension Components: If your kit includes additional components, such as sway bar links or control arms, make sure these are connected and tightened to the manufacturer’s specifications.

Step 5: Lower the Vehicle and Check for Proper Alignment

Once everything is installed, carefully lower the vehicle back to the ground using your car jack. Remove the jack stands and ensure the vehicle is securely resting on the ground.

• Check for Alignment: It’s important to check your vehicle’s alignment after installing a new suspension. If your vehicle’s suspension geometry has changed (such as raising the ride height), you may need to have a professional align the vehicle’s wheels to ensure proper handling and tire wear.

Step 6: Test the Suspension

Before taking your vehicle out for a test drive, take a moment to check all bolts and components to ensure they are tightened properly. After everything is secure, take the vehicle for a short test drive. Pay attention to how the vehicle handles, noting any noises or changes in ride quality. A smooth ride, better handling, and a more stable feel over bumps are indicators that the suspension has been installed correctly.

Step 7: Final Check

After the test drive, re-check the suspension components to ensure they are still tightly secured. It’s always a good idea to check everything again after a few days of driving to make sure nothing has come loose.

Conclusion

Installing a Dobinsons suspension kit is a rewarding DIY project that can significantly enhance the ride quality, off-road performance, and handling of your vehicle. By following these steps and using the right tools, you can upgrade your suspension and enjoy the improved comfort and stability that Dobinsons products are known for. However, if you’re not comfortable with suspension installation, it’s always a good idea to consult with a professional mechanic to ensure the job is done safely and correctly. With Dobinsons, you’re investing in durability and performance that will last for years to come.