Wireline series Core Barrel stop ring BQ NQ HQ PQ NQ3 HQ3 from qocsuing's blog

Wireline series Core Barrel stop ring BQ NQ HQ PQ NQ3 HQ3

The drilling fluid circuit operates withinthe available annular areaprovided.More specifically, after travelling through the drill rods, the fluid enters the core barrel.Get more news about Wireline Stop Ring,you can vist our website!

There it is channelled between the inner and outer tubes, exiting via the throat of the diamond bit, and back out between the outer tube and bore hole wall to the collar .

At the bit end of the inner tube, core lifter case adjustment and core lifter selection are of great importance. The core lifter case needs to be placed close enough to the throat of the bit to allow for efficient core breakage, butundesirable increase in fluid pressureand/or sample washing from the drilling fluid.

By design, the tapered core lifter slides along the inside of the core lifter case, wedging and securing itself onto the core during core recovery and breaking.Stop Ring, Core lifter, Core lifter case, Locking coupling, adaptor coupling, Landing ring, Inner tube Stabilizer, overshot, Casing tube, Casing bit, water swivel, hoist plug, fishing tools,wrenches, sub adaptor, foot clamp,etc...

The core lifter is used in core drilling system, produced by high quality spring steel. It plays a positioning effect to prevent the core barrel accessories shift.It is a component of core barrel, set use with core lifter case, stop ring, locking coupling, adaptor coupling, landing ring, etc.