© Copyright Our Wall
The definition of metal stamping parts
Stamping (also known as pressing) is the process of placing flat sheet metal in either blank or coil form into a stamping press where a tool and die surface forms the metal into a net shape. Stamping includes a variety of sheet-metal forming manufacturing processes, such as punching using a machine press or stamping press, blanking, embossing, bending, flanging, and coining.This could be a single stage operation where every stroke of the press produces the desired form on the sheet metal part, or could occur through a series of stages. The process is usually carried out on sheet metal, but can also be used on other materials, such as polystyrene. Progressive dies are commonly feed from a coil of steel, coil reel for unwinding of coil to a straightener to level the coil and then into a feeder which advances the material into the press and die at a predetermined feed length. Depending on part complexity, the number of stations in the die can be determined.To get more news about stamping parts manufacturer, you can visit tenral official website.
Stamped parts were used for mass-produced bicycles in the 1880s. Stamping replaced die forging and machining, resulting in greatly reduced cost. Although not as strong as die forged parts, they were of good enough quality.
Stamped bicycle parts were being imported into the United States from Germany in 1890. U.S. companies then started to have stamping machines custom built by U.S. machine tool makers. Through research and development Western Wheel was able to stamp most bicycle parts.
Several automobile manufacturers adopted stamped parts before Ford Motor Company. Henry Ford resisted the recommendations of his engineers to use stamped parts, but when the company could not satisfy the demand with die forged parts, Ford was forced to use stampings.
Over the history of metal stamping, forging and deep drawing, presses of all types are the backbone of metals manufacturing. The processes continue to evolve and improve in moving more metal in one stroke of a metal stamping press. Press and interconnected automation devices increase production rates, reduce labor costs and provide higher safety levels for factory workers. In today‘s metal stamping environment, controls such as I-PRESS with Connected Enterprise are able to capture history, send reports or the I-PRESS & Automation control can be viewed from remote or mobile devices. A new trend in gathering information on today‘s production for historical data.
The Wall