How Do You Repair Roof Slates? from Feroz Ali's blog

Roof slates were used on the roof of older homes, with little maintenance and lasted over 100 years. They are still in style and are used on luxurious homes and places that are pretty expensive. These slates cost more than regular shingles, but have proven their worth. The texture of the tiles provide a elegant appearance to new homes, churches and other locations.

This type of roofing outlasts asphalt shingles. The slates are low maintenance and can last many more years than regular roofing material. Roof slates offer resistance to fires and wear from the weather. Rotting and insects do not stand a chance with the durability of the slates compared to asphalt shingles. The ability to keep these common problems at bay, make roofing more desirable.

There are a wide variety of colors and sizes. They tend to be heavy and require care when they are handled. When handled carelessly, the slates may crack and cost more money for repairs or replacement. Many people suggest that a specialist install or repair this type of roofing to  be roof repair gerrads cross  reduce the risks and costs associated with rough handling and carelessness.

Even a small amount of pressure may cause them to crack or split. Caution should be used when coming in contact with the roof or while handling the delicate slates. Repairing roofing without knowledge of the processes can be a bad idea, however expertise is not necessary. It is not a far-fetched idea to repair broken slates on your own if you have the ability to do so.

Find and Replace Any Cracked Slates

Locate spots on the roof that may be cracked or broken. Using a hacksaw or a hammer, cut or break the nails that hold the slates in position. Repeat as much as needed.

Replace the Old Slates With the New Ones

Draw a line on the back of the slates showing exactly where to cut it. With a hammer and nail, make holes along the line. Place the slate on the edge of a scrap board and tap the slate with the hammer. This will remove the unneeded portion of the slate.

Place a Hook Where the New Slate Will Go and Insert Slate

Put a hook where the roof slates go by hammering it to hold the tiles into position. Hook the lower portion of the slates into the hook to complete the project.